.webp)
Ionization Chambers SNC 125c™ SNC 350p™ SNC 600c™
Sun Nuclear reference-grade ionization chambers are optimal instruments for scanning and reference dosimetry measurements.
They ensure quality assurance of your linear accelerator in compliance with reference-grade standards and dosimetry protocols including IEC 60731, AAPM TG-51, IAEA TRS-398, and DIN 6800-2.
Reliable and accurate reference-grade ionization chambers are vented, waterproof, and fully shielded. The white chamber housing facilitates easy visualization during setup.
SNC125c™ for reference-grade dosimetry.
- Enhanced penumbra without signal loss
- Maintains ideal orientation during scanning
- 0.125 cm³ sensitive volume with penumbra performance close to a microchamber
- $k_Q$ factors available for TG-51, TRS-398, and DIN 6800-2 calibrations
SNC350p™ for electron reference dosimetry.
This parallel-plate ionization chamber is well shielded to minimize perturbation effects for reference, field, and scanning dosimetry of therapeutic electron beams. It is also suitable for reference dosimetry commissioning and TDD/TPS quality assurance.
- Supports absolute or relative dose measurements
- Complies with design principles described by Dr. M. Roos et al. (IAEA TRS-381)
- Meets AAPM TG-51 and IAEA TRS-398 requirements for low-energy beams (< 10 MeV)
- Complies with reference-grade dosimeter performance standards (IEC 60731) and can be used for cross-calibration
SNC600c™ for photon and electron reference dosimetry.
The SNC600c is a reference-grade dosimeter based on the classic Farmer chamber design.
- Reference-class performance (IEC 60731)
- Beam quality correction factors ($k_Q$) available for TG-51, TRS-398, and DIN 6800-2 protocols
- Classic Farmer-type design allows use in most phantoms
- White housing ensures easy setup verification
Specialized Solutions for Modern Radiotherapy
Technological products for specialized clinical tasks and compatibility with modern equipment. MacroMedics offers not only core immobilization systems but also specialized solutions for modern clinical environments where adaptation to equipment, protocols, and individual department requirements is essential.
This category encompasses products that help clinics:
- Work with various types of equipment.
- Support specialized clinical workflows.
- Integrate solutions into complex clinical scenarios.
- Ensure compatibility with modern imaging and treatment technologies.
Category Products
- Couchtops
- MR-Compatible Products
- Special Clinical Solutions
- Technical Accessories for Workflow Integration
Immobilization Accessories and Materials
Comprehensive solutions for precise and comfortable patient positioning. In addition to primary positioning systems, MacroMedics offers a wide range of ancillary materials and accessories that help create an individualized, stable, and clinically effective immobilization system.
This category includes solutions that support:
- Personalized fixation
- Custom geometry molding
- Enhanced patient stability
- Efficiency in daily clinical use
Category Products
- Vacuum cushions
- BOLX™
- Thermoplastic Bolus
- MacroBath™
- Thermoplastic water bath/oven
- CouchStrips™
- Ancillary accessories
Properly selected accessories and materials are a vital component of stable, reproducible, and clinically effective patient immobilization.
Download PDF BrochurePelvic, Abdominal, and Extremity Positioning Systems
Pelvic, Abdominal, and Extremity Positioning Systems
Reliable patient support for stable and reproducible setup. MacroMedics solutions for the pelvis, abdomen, and lower extremities help create a stable, comfortable, and repeatable patient position during treatment.
This category encompasses support systems used for:
- Lower body fixation
- Pelvic position stabilization
- Precise placement of legs and feet
- Reduction of unintended patient movement
Category Products
- Knee Support
- Feet Support
- LEPS™
- Prone Pelvis Board
- LEX-Ultra™
- UniqFix™
About Company
BIOSENS LLC is a Ukrainian company in the field of medical technologies, specializing in solutions for radiation therapy and radiosurgery. Since 2011, the company has been implementing and supporting high-tech equipment for the treatment of oncological diseases.
BIOSENS is an official partner of leading global manufacturers, including Elekta, C-RAD, MacroMedics, Sun Nuclear, and Beekley, and acts as an integrator of comprehensive solutions, combining engineering, clinical, and service expertise at all stages of project implementation — from consulting to long-term technical support.
The company’s solutions have been implemented in more than 30 medical institutions. Over 40 linear accelerators, brachytherapy systems, and patient positioning control technologies are under service support. The company ensures up to 95% equipment availability and prompt service support with a response time of up to 24 hours.
Areas of Cooperation
Marketing and Technical Consulting
- Promotion of radiotherapy solutions
- Technical presentations
- Equipment selection and configuration
Regulatory Support and Consulting
- Registration of equipment in Ukraine
- Consulting on the procedure
- Preparation of documentation
Cooperation with Private Institutions
- In the field of radiotherapy and radiosurgery
- Support for investment projects
- Consultations on center establishment
Import and Logistics
- Customs clearance support
- Supply coordination
- Delivery organization
Project Management
- Site audit and preparation
- Coordination of participants
- Control of deadlines and quality
Turnkey Projects
- Supply, installation, and launch
- Commissioning
- Staff training
Service and Technical Support
- Warranty and post-warranty service
- Regular maintenance
- Response within 24 hours
Equipment Installation and Upgrades
- System installation and launch
- Equipment modernization
- Optimization of center operations
Remote User Support
- Remote technical support
- Monitoring and diagnostics
- Support for continuous operation
